November 2017


10 Tips To Save Money With Your Tumble Dryer

Household laundry is one of the biggest sources of energy cost for homeowners, and there are roughly 14 million households using electricity to dry clothes.

If you’re one of those who plan to use a tumble dryer over the coming months, below we have a handful of helpful tips which will save you money and energy consumption, at the same time as ensuring your laundry dries.

  • Select the fastest spin mode on your washing machine to limit the amount of time your clothes are in the appliance. Keep in mind, tumble dryers use considerably more energy than a washing machine.
  • Keep your tumble dryer filters clean and free from lint. Tumble dryer guides advise to clean the filters after every use, and by doing so you can help keep yours working efficiently as the air flow will not be impeded, meaning the appliance will not need to work as hard to dry clothes nor will it take as long to dry clothes.
  • Avoid drying small loads at a time. Although a second consecutive drying load will take less time to dry, drying larger loads at once will use less electricity and therefore cost you less money.
  • Dry similar fabrics together, as this will help reduce drying time and ensure a more even dry.
  • Reduce drying time by up to 25% by adding tumble dryer balls in with your load. Not only are the balls a natural way to soften fabrics, but they also lift and separate the laundry allowing the hot air to flow more efficiently, which speeds up the drying time – making your appliance more energy efficient.
  • Untangle your laundry before putting it into the tumble dryer. Large knots / tangled laundry takes longer to dry – and is often more difficult to dry – so you need to make sure there aren’t any tangles before you place your laundry in the appliance for drying.
  • Fasten the bottom of duvet covers before placing them into the tumble dryer, as this will prevent smaller items becoming trapped and not drying.
  • Choose the correct drying setting. Many modern dryers come with an automated setting and whilst this may seem like a good function, in reality it is likely to use more energy as your appliance will continue to tumble after the clothes are dry to remove creases. By choosing a manual setting, you won’t be unnecessarily using more heat to dry your clothes. In fact, it is recommended to bring your clothes out of the tumble dryer when they are still slightly damp, as this will make them easier to iron.
  • Avoid adding wet clothes mid-drying cycle. Not only will this add to the time it takes for your laundry to dry, but it can also increase the risk of the thermostat on the appliance tripping.
  • Consider the placement of your tumble dryer, as this can impact on its drying time. If your tumble dryer is placed in a damp room which traps condensation, it will increase the drying time, which is why – where possible – you need to place your tumble dryer in a room which is warm. Placing it in a warm room will mean the appliance doesn’t need to work as hard to heat up, if this isn’t possible place it in a room where a window can be opened, so fresh air can circulate.

Along with following the tips above, when using a tumble dryer, selecting the right model for your needs and requirements in the first place can help you save energy and money every time you use the appliance.

Key to selecting the right tumble dryer for your home includes selecting the right:

  • Type
  • Drum Size
  • Energy Rating

Tumble Dryer Type:

There are 3 common types within the UK:

1) Vented – these use a hose to expel the damp air produced as a result of the drying process. Due to this, they can often use more energy to dry your laundry making them more expensive to use.

2) Condenser – these separate water from the moist air, which is then emptied after drying or pumped out by a waste pipe. Due to not needing a vent hose, the heat is kept in the appliance, meaning they don’t need to use as much energy to dry.

3) Heat Pump – these conserve the hot air created and reuse it, making them a lot more energy efficient compared to other types of tumble dryer. However, it is worth noting that they are more expensive to purchase.

Drum Size:

When it comes to selecting a drum size, the options available are usually between:

  • Large – offers a capacity of 8kg upwards
  • Average – offers a capacity between 6kg to 7kg
  • Compact – offers a capacity between 3kg and 5kg

And whilst bigger may seem better, as touched upon above if you cannot fill your drum you will be wasting energy, and therefore money, when using the appliance.

To ensure you’re getting a drum size which covers the needs and requirements of your home, you need to consider how much laundry you’re likely to need drying at any one time, and for the average household a drum which has a capacity between 6kg and 7kg will suffice.

Energy Rating:

As with all large household appliances, tumble dryers come with an EU standard energy rating, which indicates how energy efficient the appliance is. The energy ratings vary between A+++ and G, although most are C rated – and we obviously recommend opting for the highest rated one your budget can stretch to.

By following the advice outlined above, you will be able to save energy and money in both the short and long term when using your tumble dryer. The following tips will also help you to effectively dry your laundry, even when it isn’t possible to hang it out on the line.

Give your house that sparkle by keeping your cleaning appliances in full working order, with the help of”>BuySpares and our range of spare parts and accessories.

4 Tips On How To Enhance Your Business With The Use of Industrial Scrubbers

Virtually every facility requires industrial scrubbers to keep the floor clear of unsightly dirt and debris that can cause accidents. It is also a must to be able to clean the floor without subjecting individuals to wet floors or walkways obstructed by bulky equipment. Fortunately, floor scrubbers tend to use a system that sprays both cleaning chemicals and water onto the floor so that dirt and residue can be broken up and be automatically removed by a squeegee, a vacuum, or a combination of both so that the floor is completely dry.

While the benefits of having a floor scrubber are obvious, how to choose the right one may not be. There are many types available and selecting the right type is dependent upon the size and amount of dirt that needs to be removed; if the dirt is oily, fibrous, or wet; and the surface type (bare concrete, tile, outdoor, tile concrete, etc.). The following are questions to ask yourself to help you choose the right industrial floor cleaner for your facility:

1. Ask yourself: Sweep, scrub, or both? Some facilities require sweeping, some require scrubbing, and others need both. Although sweeping may seem like the ideal way to remove fine dust, a scrubber is actually the ideal choice, as it is the ideal choice for oily or really dirty surfaces. Sweepers work better for removing bulky debris that includes metal shavings, chips, and fibrous materials. Sweeper/Scrubber combos are ideal when the facility is small and one person is responsible for the cleaning due to small holding tanks.

2. Walk-behind or ride-on? Of course the answer is dependent upon the area that must be cleaned. Another factor to consider is that ride-on machines increase productivity by 64% and there is a return on investment due to the labour savings, which is seen in approximately 3 months.

3. What about narrow spaces? There are ride-on scrubbers that are narrow enough to fit in small spaces, but walk-behind floor scrubbers may work best for those extra narrow spaces. Again, it is important to consider the area as a whole and the labour savings, so ask yourself if those narrow areas can be made less narrow or items moved so that a ride-on can fit, otherwise a walk-behind may be ideal.

4. What about the floor type? Scrubbers are intended to work on hard floor surfaces, but the floor type will determine the brushes, squeegees, brooms and other accessories that are chosen. For example, smooth, sealed surfaces are better cleaned with soft gum rubber squeegees so that excess water can be removed and the floor dried quickly.

By asking yourself the above questions, you are well on your way to choosing the right”>industrial floor scrubber for your business. You want ease of use, a scrubber with an adequate tank capacity to do the job, and you want one that will thoroughly clean for both the longevity of the floor and the cleanliness and safety of the facility. By knowing what kinds of scrubbers will benefit you by observing floor type, the dirt type, and what is more economically feasible for you, you can have the ideal floor scrubber.

Since 1959, Steamaster has been dedicated to providing businesses with safe and effective cleaning solutions by offering only the finest scrubbers and cleaning devices. Go to”> to find out how Steamaster can help you choose the perfect scrubber for your business.

15 Tips to Help You Save Money on Cleaning Products

Cleaning your home is often seen as a chore, and with the multitude of cleaning products available it can also be costly. But, there are a number of steps you can take to cut the cost of cleaning your home – without compromising on the quality of the clean.

One such method is to use a range of everyday household products you can also use to clean your home?

Bi Carbonate of Soda:

  • Sprinkle carpets with bicarbonate of soda to remove pet smells which have become trapped. Allow the bicarbonate of soda to soak in to the carpet, before vacuuming clean. The same method can also be used to remove baby sick odours from your carpets.
  • Remove unpleasant odours from around your fridge. A small pot of bi-carb at the back of the fridge will soak up unpleasant odours caused by smelly cheeses and other food products. For even stronger odours which you wish to remove, try rubbing a small amount of vanilla extract over the walls.
  • Drains can become blocked by a number of things, from food residue to grease being poured down the plug. Unblocking a drain can be hard work and expensive if purchasing various drain cleaning products to try. But it needn’t be.

    Instead, pour quarter of a cup of bicarbonate of soda down the drain, followed by a cup of vinegar. Leave this for fifteen minutes, before flushing away with plenty of boiling water.

  • The oven suffers from a range of dirt caused by food spills and splatters, and a lot of commercial cleaning products can leave an unpleasant aroma due to the chemicals used. But, there is a way to clean your oven thoroughly without such smells, by using bicarbonate of soda.

    Mix bicarbonate of soda, salt and water into a paste and smear this over the oven, leaving it to soak into the dirt for at least fifteen minutes. Once the time has passed, use warm water and a cloth to wipe clean – and see the dirt disappear.


  • As with all appliances which rely on water, your kettle can suffer from the build up of limescale caused by hard water. But you can tackle this with the help of a lemon. Simply fill the kettle up with water, chop up a lemon and place the chunks into the kettle, boil it and then leave overnight.

    In the morning, empty the kettle and boil fresh water in it, to remove the taste of lemon. By descaling any appliance, it’ll run more effectively – helping save you money in both the long and short term.

  • Tired of scrubbing your microwave clean? Make the cleaning easier by using the juice of a lemon. Simply squeeze one lemon into a Pyrex jug half filled with water.

    Place the jug into the microwave onto maximum heat for five minutes. The steam generated will loosen the dirt enough that it can be wiped away, whilst the lemon fragrance will also provide a pleasant aroma.

  • Is the woodwork in your home looking a bit scuffed or as though it has seen better days? Instead of bringing out the polish in an attempt to buff it up, use a squirt of lemon juice and a splash of olive oil. This mixture will bring a shine back to your woodwork and remove any lasting dirt or stains.


  • Suffering from limescale around the showerhead? Tackle this using little more than a food bag and vinegar. Simply, fill the food bag with distilled white vinegar and place it over the head, securing it using an elastic band. Allow the shower head to soak – ideally for a day – before removing the bag and turning the shower on to rinse off any leftover vinegar.
  • Achieving streak free windows can be difficult. No matter how hard we try it’s likely the sunlight will still show a streak or two. But you can combat streaks on your window by using vinegar and newspaper.

    Simply dilute 1 part vinegar with 3 parts water, wash your windows and buff dry with the newspaper, to see streaks vanish and your windows shine.

Other Household Products:

  • Remove “scum” marks from around your bath and taps with the help of shampoo. Simply squirt your current shampoo onto a cloth and scrub the area in question, before rinsing clean.
  • Leather furniture looks fantastic when it’s first in your home, but through general wear and tear it can easily become scuffed. Removing such scuffs however can be as easy as eating a banana.

    Simply rub the inside of your banana skin over the scuff before buffing the mark with a cloth, although it is recommended to try it on a small area first.

  • Is the bottom of your favourite vase looking grubby? Struggling to get a cloth into it to provide it with a thorough clean? Turn to the uncooked rice in your cupboard. Mix the rice with a sprinkle of dish detergent and warm water.

    Pour the mixture into the vase and swill around, before rinsing clean.

  • Tackling grease can be a difficult task and if it isn’t done correctly can see the grease smear,. But you can tackle the grease using a grapefruit and some salt.

    Slice the grapefruit in half, dip the cut end in salt and then scrub over the greasy area with the fruit. The natural chemicals from the grapefruit will attack the bacteria and dirt, whilst it’ll also disinfect the area.

  • Over time, stainless steels pans can look tarnished, but there’s no need to a) throw the pans away or b) spend hours scrubbing to try and bring the shine back. Instead, turn to the tomato ketchup in your fridge.

    Add a thin layer of tomato ketchup over the pan and leave it to soak for half-an-hour. The acetic acid will react with the tarnish and once the pan has been wiped clean the sparkle will return.

  • Whether in the bathroom due to a lack of ventilation or on an internal wall, mould in the home can be unsightly. But you can tackle it without the need for chemicals which leave an unpleasant aroma as they dry, with the help of vodka.

    Simply spray the vodka onto the area in question and leave to soak in for fifteen minutes, once the time has passed scrub it clean with an old toothbrush.

Give your house that sparkle by keeping your cleaning appliances in full working order, with the help of”>BuySpares and our range of spare parts and accessories.

10 Outside Areas to Clean When Preparing Your House For Sale

1. Roof

The roof is the first thing people will see as they drive or walk up to your property, so make sure it’s clean! Remove any debris that has managed to get up there, and ensure that mould, stains and dirt are cleaned off. Getting up on the roof with a good pressure cleaner will make it look newer and prolong its life.

2. Gutters

Your gutters can fill up with leaves, branches and mud over time. Having this rubbish stick out from the gutter and be seen from the ground will look unsightly. Not only that, but it prevents the gutter from doing its proper job – moving water away from your home. Completely remove debris from the gutters and then wash the gutters down with a hose. At the same time ensure your downpipes are clear. Dirty gutters may indicate to a buyer that the house has not really been looked after and only surface cleaned.

3. Garden

Remove all the weeds, fallen branches, twigs and other miscellaneous items from your gardens. Trim back overgrown plants and let some light beam down to the garden bed. This will leave your garden looking clean, tidy and spacious. Having a clean garden will leave the impression that it is easily maintained.

4. Driveway

Make sure the driveway is swept clean of loose dirt and any oil spills are scrubbed away. Often times the dirt on driveways is superficial so arranging for it to be pressure cleaned can bring it back to a new condition.

5. Lawn

Keep the lawn mown and all the lawn edges trimmed along pathways and garden beds. Having a neat lawn reflects the state of the home and will bring the yard to life.

6. External Walls

Start by brushing off the cobwebs that have gathered around the house – check the eaves, windows, pillars and around outside lights. Next clean down all the external walls. Any water that has run down the wall may have left stains or mould growth. Depending on the type of material used on your outside wall a pressure cleaner can be used here as well.

7. Outdoor Furniture

Clean down and arrange your outdoor furniture, make it look presentable and if you have a BBQ make sure grease has been cleaned off from the grease trap, the grill and the surrounding area where grease may have spattered.

8. Pool

If you have a pool make sure any debris floating on the surface or sunk to the bottom is taken out. Bring the water up to its correct level and treat the water to keep it looking that beautiful blue colour – last thing you want is for the pool to suddenly turn green on the day you have potential buyers coming through.

9. Ponds and Water Features

If you have any water features, ensure they are in good working order and that any algae or overgrowth has been cleaned out. Dead plants and especially dead fish should be removed.

10. Windows

Arrange for all your windows, fly screens and window frames to be cleaned. By using a detergent that cuts through grease (like dish washing detergent) you can make sure oily marks left by hands or pets are completely removed. Fly’s and insect are known to leave their droppings on surfaces around windows too, but with a bit of water and a clean rag you can remove these dropping and leave the surfaces looking clean again.

If you are living in Sydney, Australia and want further information from a local company on cleaning your”>Sydney gutters or are actively looking for a”>gutter cleaner then contact Sydney Gutter Clean

3 Common Carpet Cleaning Problems

Are you concerned that your carpets are not looking as clean as they should be? Even if you exercise a lot of care when doing carpet cleaning, there are a few problems that you night encounter. In fact, you might notice that certain problems are actually quite difficult to deal with.

Recurring stains: You might find that certain stains on your carpet keep coming back no matter how hard you work to remove them. You might actually be causing these problems because of working on the stains in an incorrect manner. If you leave lots of soap residue on the carpets or even leave it very wet after having cleaned it then it will just attract a lot more dirt from the surrounding areas. Also, if the carpet is lying on a spot that gets dirty very often then the carpet will also get stained. Basically, any stain on the carpet should be cleaned thoroughly and repeatedly and it should be dried very well.

Mildew: This too happens because of an over-saturated carpet. If it does not get dried properly then it will easily harbor mould and fungus. Not only can this result in health issues such as allergies and respiratory problems but it will also make the room smell very bad.

Damaged Caused Because of Furniture: If furniture lies too long on the same spot on the carpet the fibres underneath will get ruined. Also, the special products used to clean furniture can result in damage to the carpet underneath. It is best to use pads under the furniture so that damage to the carpet can be reduced. It is also a good idea to move the furniture around from time to time.

If your carpets are very expensive then you need to ensure that they are looked after properly. It is not a good idea to risk ruining them by using the wrong methods of cleaning and maintaining them. While there are many things that you can do to prevent them from getting dirty (or at least reduce the amount of damage), you still need to get professional carpet cleaning done from time to time.

A professional carpet cleaning company will ensure that you don’t have to deal with these commonly occurring problems. You will no doubt have to spend some money to get your carpets cleaned but you will be glad with the results. Not only will your home look and smell better but your carpets will also last longer than usual.

Are you looking for a local carpet cleaner?

Carpet Cleaning Melbourne [] is the best place to go for all your carpet cleaning tips and tricks.

When it comes to Carpet Cleaning Derrimut [] this really is the only place to visit!

12 Wonders of Baking Soda

Do you know that baking soda has many different uses in your household? From baking, cleaning, deodorizing, to personal care, baking soda can be one of mom’s versatile, inexpensive, effective, and toxic-free household friend. Baking soda helps regulate pH – keeping a substance neither too acidic nor too alkaline.

I am amazed at how this inexpensive product has personally helped me in so many ways and so I thought of writing about it. Here are different and creative ways to make baking soda do wonder in you and in your home.

1. Use as hair shampoo. Baking soda cleans out the excess product, remove impurities, and clean your hair better than any expensive product on the market. Try it. You may choose to use it regularly or opt to use it on your hair once or two times a month. Just mix 1/2 cup onto 3 cups of very warm water, and use it on your hair.

2. Use as itch relief. Baking soda can relieve itches of all kinds. I had my chickenpox at the age 30 last year, and I am grateful that I learned about its wonders for itches. For widespread and hard-to-reach itches, add 1 cup to a tub of warm water and soak.

3. Use as deodorant. Skip harsh deodorant! Pat baking soda onto your underarms to neutralize body odor.

4. Use as facial scrub and body exfoliate. Treat yourself to a revitalizing body and facial scrub by mixing 3 parts baking soda to 1 part water. Rub gently to skin i circular motion. Rinse well. May be used daily.

5.Use as foot and shoe deodorant. Deodorize shoes by sprinkling 1 or 2 teaspoons to absorb moisture and remove odor. Too soothe and cleanse your feet, dissolve 3 tablespoons in warm water and soak your feet. Scrub gently and rinse.

6. Use as vegetable and fruit wash. Want a safe way to wash chemicals and pesticides off your fruits and vegetables? Add 3-4 tablespoons onto a pot filled with water. I do this when juicing fresh fruits.

7. Use as deodorizer. Use to clean and deodorize refrigerator, dishwashers, trash cans, closets, cars, etc. 8. Use as detergent booster. Add 1/2 cup to each laundry load to help clothe become fresher, cleaner and brighter.

9. Use to sanitize personal items. Use it to clean your brushes, combs, nail cutter, manicure and pedicure tools.

10. Use to clean microwave, oven and kitchen utensils. Mix with warm water and use to remove dirt, grease and oil.

11. Use with warm water to clean baby bottles.

12. Use as insect repellent. Scatter it under sink and basement to repel cockroaches and ants.

With the many uses and benefits of baking soda, you can choose to replace many of your harmful household products with this environment-friendly product. It’s versatile, budget-friendly, toxic-free and effective.

Quality Life Through Simple Living


3 Steps for Removing Red Wine Stains From Your Carpet

A dinner party is never complete without having a glass of wine with your friends, family, and other guests. Whether it’s a celebration or simply a get together with some of your close friends, wine really adds to the festive mood of any occasion. Sadly, in many of these dinner parties, food and drink spills are a normal occurrence that can cause real headaches when it comes to cleaning. One particularly hard spill to clean up is red wine on your carpet.

Red wine spills are a source of frustration among carpet owners as they leave a bright red spot which can be very difficult to remove, especially with light-colored carpets. So how exactly should you remove the wine stain from your carpet? Well, here are three simple steps that you can take in order to get rid of that stain once and for all.

1. Remove the Excess Wine By Blotting – Blotting helps remove the excess wine to prevent it from getting deeper into the carpet fibers. The faster you remove the excess liquid, the better your chances of cleaning it more easily. To do this step, get a clean cloth and blot the stained area. You will notice that doing this will absorb the liquid. Repeat this step until there is no more wine transferring onto the cloth.

2. Clean it Using Baking Soda – The next step is to clean the soiled area using baking soda. Baking soda works great in the kitchen and also as an all-around cleaning product for messes in the home. Baking soda works well for removing stains as well as for deodorizing many surfaces, such as upholstery and rugs. To use baking soda in this case, you will need to create a cleaning paste by mixing three parts of baking soda with one part water. Apply this paste onto the stained area and let it dry, then use a vacuum cleaner to remove it. You will notice that the stain will be gone, or at least it will have lessened. Repeat this step until all of the stain is removed.

3. Rinse the Area with Water – This last step is important because it helps prevent residue from being left behind and building up in the carpet fibers. Rinse the area you just cleaned with clean water and dry it using a clean rag or towel.

That’s it! After three simple steps, your carpet will surely be free and clear of any wine stains it might have. Just follow these helpful tips and you’ll definitely be able to get rid of that wine stain for good.

To find a qualified carpet cleaner visit”>Carpet Cleaning Richmond VA

3 Things You Really Need to Know Before Buying Floor Machine Equipment!

The most important thing to look at when purchasing floor equipment is the type of floor you will be maintaining and also the environment that you will be cleaning. Floor machines are used to scrub, strip, and polish hard surface flooring. Some floor machines are designed to only do one of these tasks while others are versatile and can be used for many different cleaning jobs. The two main types of floor machines are single speed and dual speed. Single speed machines are used primarily for one cleaning task and speed of the machine is then matched to the task it performs. Dual speed floor machines are more versatile and can be used for scrubbing floors, stripping floors and also polishing floors. Low-speed machines usually run at around a 175 revolutions per minute. While dual speed machines have two speed settings which are usually around 175 RPMs and 300 RPMs. For scrubbing and general stripping of floors it is recommended that you use a machine that will spin at around 175 RPMs. For polishing a floor the machine must be faster and spin the pad driver at around 300 RPMs. The three main areas to look at when purchasing a floor machine is the type of machine, the size and power of the machine, and the attachments that can be utilized with it.

The size of the machine relates to the size of the cleaning disc or brush that is attached to the lower unit. Power usually relates to the size of the motor that spins the brush. Most floor machines range in size from 10 inches in diameter up to 27 inches in diameter. It is important to match the size of the floor machine with the area you are cleaning. If the area is small or has obstacles is wise to pick a machine that is smaller and more maneuverable. For larger areas that are open with no obstacles a larger cleaning diameter will be faster at cleaning the floor. The size of the motor is measured in horsepower. When it comes to floor machines, horsepower usually has no effect on how fast the brush or pad driver will turn. However if you are stripping floors and putting extra load on the motor is recommended that you have a larger powered machine. Most floor machine motors range in size from 1/2 to 2 hp. An added benefit of a larger motor is that it will usually last longer than smaller units.

Floor attachments are always important when purchasing any type of floor equipment. Floor machines can utilize such floor attachments as brushes, pad driver’s, sanding discs and scraper discs. Brushes are commonly used for scrubbing hard flooring and are great for cleaning in between grout lines on tile floors. A pad driver is used in conjunction with floor pads and are generally used to either clean, polish or strip floors. There are many different kinds of floor pads and the color of the floor pad will depend on the type of job it is used for. With most floor pad manufacturers the darker the the color of the pad the more aggressive the pad will be. Lighter colored pads are generally used for polishing floors and have fine plastic threads. Darker pads such as black or brown are generally used for stripping or removing old floor finish from a floor before new floor finish is laid down. Sanding discs can be used in conjunction with a pad driver to resurface hardwood floors. These discs take little effort to sand down the toughest hardwood finishes. The last type of floor machine attachment that can be used are scraper discs. Scraper discs are used for removing glue or mastic from concrete or other hard surfaces. These discs can also be outfitted with diamond blades for re-honing marble or terrazzo floors. It is important to check out how much these accessories cost before purchasing your floor machine. Floor equipment accessories and attachments can easily add up in price escalating cost of the floor machine.

There are many floor equipment manufacturers. Some of the best that produce floor machines are NSS, Windsor, Tornado, US Viper, and Koblenz. All of these manufacturers build quality floor equipment that will stand up to heavy duty use and harsh punishment. It is important to buy a machine from a reputable manufacturer because in case of machine failure parts will be easily accessible. Most floor equipment parts are available from local and online manufacturer dealers. Most floor machines range in price anywhere from $500-$3000. The construction of the machine and types of material used will affect the price considerably. If you are commercial cleaner it is recommended that you buy a floor machine with a steel housing and steel frame. Most residential or light duty models utilize a plastic housing which cuts down on cost but will not hold up to heavy duty cleaning.

Great cleaning tips and floor equipment information by Lee Harris can be found at”> Lee Harris is an expert in the floor equipment and cleaning industry and can answer all your questions about”>floor equipment and how to save money on these types of cleaning products.