Archive

August 2019

Browsing

5 Bacteria-Infested Areas of Your Home You May Not Know

Illness causing germs and bacteria are lurking around everywhere in your home. Sure, you know about the bacteria hot spots like cutting boards, toilet handles and door knobs, but there are a few surprising bacteria-infested areas of your home that you may not know about. Your entrance way is filled with a variety of bacteria, germs and pollutants. So are kitchen walls, floors and the upholstered furniture in the family room. Bacteria are hiding in every room of your home and if anyone in your home has a compromised immune system, or is prone to allergy or asthma attacks, traditional cleaning combined with the use of a robotic cleaner may lessen bacteria caused flare-ups.

Entryway Bacteria

Everyone who enters your home brings in some type of bacteria on the bottom of their shoes. Whatever has been walked in outside is carried in on the bottom of shoes and deposited first in the entryway, then throughout every other room in which you walk. Fecal matter from dogs, cats and birds, polluted water, sidewalk spit and a host of lawn chemicals and insect debris cling to shoes with each outdoor step and is brought indoors.

Kitchen Bacteria

Cooking steam covers the kitchen ceiling, walls, cabinets and floors. The moist covering acts like a magnet and a spider web, attracting and catching every dust, germ and bacterial particle that passes through the kitchen. Kitchen countertops and dining tables are also filled with bacteria brought in on the bottoms of purses, backpacks, shopping bags and the like.

Upholstered Furniture

Bacteria, germs and pollutants of all sorts land on upholstered furniture ever time someone sits down or tosses a jacket on a chair. You, your family, friends, neighbors and pets all deposit a host of bacteria on upholstered furniture with each sit-down. Whatever is deposited in the comfy fabric (including carpet and area rugs) waits for someone to attach itself too, unless it is cleaned away regularly with a robotic cleaner.

Moist Bathroom Environment

Bathrooms have moist, warm environments and are prime breeding grounds for bacteria, mold and mildew. Shower curtains, bath mats, damp towels on floor, carpeted bath mats, toothbrushes and mouthwash bottles all harbor germs and bacteria. Bars of bath soap harbor illness-causing bacteria when used by a sick person (fecal matter) and communal family towels used for hand drying are often more germ-infested than the toilet handle.

Washing Machine

When clothing or bedding used by a sick person is laundered without bleach, the illness causing germs and bacteria are not killed. They cling to the inside of the washing machine and attach to next load of laundry. That is one way a contagious sickness (like a stomach virus) is passed throughout a family.

Where dirty clothes are piled, like the inside or a laundry basket or in the floor, is also another place germs lurk and grow.

Vivian Han is a homemaker and writes for
http://autovacstore.com/16-iclebo-robot-cleaner”>Iclebo Singapore. She previously wrote about the current
http://www.sooperarticles.com/home-improvement-articles/tools-equipment-articles/technological-advances-robot-vacuum-cleaners-market-1046108.html”>robot vacuum cleaner technology available in homes.

4 Cleaning Tips You Should Try For Your Dirty And Smelly Washer

Your washing machine also requires regular maintenance and clean-up. If you don’t adhere to these simple rules, you will be plagued by smelly and dirty washer problems in the future.

Washing machines turn smelly because of excess water inside. This prompts the appearance of molds and mildew. Moreover, the dirt and bacteria from your clothes sometimes get stuck inside the machine.

Here are some cleaning tips that will prove useful to you:

1. After washing incredibly dirty and greasy clothes, you would want to clean your washer using a mild appliance cleaner. Run an empty water cycle in the highest temperature setting to kill the germs and add a cup of the appliance cleaner. Set the washer up to quick cleaning cycle. Let it drain completely. This method should get rid of the grease left behind by your clothes.

2. Molds and mildew can grow in the rubber gasket of the machine or in the pipes. One of the best ways to get rid of molds is through the use of distilled white vinegar. Run an empty hot water cycle and add 2 cups of distilled white vinegar. If you suspect that molds are clogging the pipes, try stopping the washer for about 15 minutes before resuming the cycle. This will give the vinegar more time to loosen up debris. Allow the machine to purge out debris.

After doing this method, run another quick cycle in warm water setting. This should flush out remaining molds inside the machine. For moldy rubber gasket, just apply vinegar solution to the areas affected. Let the vinegar stay there for about 30 minutes before wiping it off.

3. To get rid of the smell, use baking soda. This cleaning ingredient can diffuse unwanted odor in the machine. It also has tiny particles that can slough off bacteria or grease on the walls of the machine.

Run the washer in the highest water temperature setting to dissolve baking soda. Add half a bag of baking soda and let the washer tumble. After the cleaning cycle, use an absorbent towel to wipe the interior of the machine. Leave the front door open to allow air to circulate inside better.

4. You can try using lemon juice. It has disinfectant properties that get rid of germs and bacteria. It also leaves a fruity scent behind. Run an empty cold water cycle and add a cup of fresh lemon juice. You can try heating up lemon in the microwave oven first. It softens up the lemon so you can extract more juice.

After using these tips, your washer should start smelling fresh and clean already. Remember these tips the next time you have encounter a smelly washer problem.

If you are looking for durability and efficiency infused in one washing machine, the
http://www.washingmachineadvisor.com/lg-washer-and-dryer.html”>LG washer and dryer will surely appeal to your taste. Be updated with the latest washing machine releases at
http://www.washingmachineadvisor.com”>http://www.washingmachineadvisor.com.

4 Top Tips for Buying Rust Remover Products

Removing rust can be a real problem. It is a difficult process, and it can be expensive, as well as environmentally unfriendly if you use the wrong process. Purchasing the right rust remover will save you a lot of time and move. Below are seven tips for helping you find the right products to solve your rust problem.

1. Rust remover products contain acid so the product needs to be stored properly.

The most common form of acid used in these products is oxalic acid. This type of acid is highly toxic, so you need to be extremely careful about how you store it. Avoid handling it around children or pets, and when you’re ready to store it, store it in a safe place where they can’t reach it.

2. Know the purpose of the rust remover.

Rust removers are used to remove rust from various surfaces like your care body, the bathroom, and even jewelry. Since you should already know what surface you are removing the rust from, this will help you determine which product to buy. Remember to read the label, especially if you are removing rust from a fabric. If you buy the wrong product, you’ll destroy the fabric, and you’ll have defeated the purpose of using the product to begin with.

3. Consider which one of the three types of rust removers you will use: conventional, organic, and homemade.

With a conventional rust remover, you will have chemicals like I mentioned before: oxalic acid. Not only is it highly toxic, but it’s not environmentally friendly, and you’ll need to take steps to make sure that you properly store it. Don’t use it outdoors for this reason. However, since you can only use this type of rust remover indoors, make sure you only use it in a highly ventilated area. You don’t want to poison yourself when you’re using it.

Organic rust removers are environmentally friendly. These are rust removers that can be used outside, so you’ll want to consider using these products when removing rust on things like your outdoor furniture. Organic products are safe for use around plants, animals, and children. Non toxic biodegradable formulas are available for the environmentally conscious.

The final type of rust remover is homemade. With these types of products, you are using ordinary household ingredients, like apple cider vinegar. Other ingredients include baking soda, borax mixed with hydrogen peroxide, white vinegar, as well as borax mixed with lemon juice. The biggest problem with making your own is that it can be messy. If you don’t want to deal with the mess, then use the organic products instead.

4. Consider the most important factors when purchasing: toxicity, effectiveness, and price.

These are the main factors you need to consider when purchasing these types of products. Avoid making yourself sick, as well as exposing, your plants, animals, or children by considering these factors first.

One of the reasons is that if you have a big project that you need to do, price and effectiveness will both be equally important. You don’t want to waste your money buying products that don’t work. You’ll have wasted your money, as well as your time, and you won’t have solved your rust problem.

Before purchasing, make sure you read the package directions carefully. When making your own versions of rust remover, find out first how much of each of the ingredients you need. Exact measurements will help you get the most effective mixture.

Start by working in well ventilated areas, especially if you are indoors. Don’t spill any of these products around your plants or on the ground. If you do, this can seep into the water supply, and since it’s highly poisonous, could poison someone. It’s probably a good idea not to work around your plants for this reason.

Finding the right rust remover can be a difficult process, especially if you buy the wrong products. This guide will help you select the right products, at the right price, and help you protect your family.

Brian Greenberg is an expert at residential and industrial
http://www.rustremover.net/”>rust removal. Learn more about his recommended products here:
http://www.rustremover.net/products.php
Evapo-Rust.